It can withstand many kinds of pressure, and is resistant to hot weather and the extreme cold of a UK winter. This is especially useful for a driveway as it will not be damaged by years of cars driving over the top. Indian Sandstone isn’t likely to split, crack or have bits peel off it either.
How strong is Indian stone?
All Indian sandstone sold by Marshall’s will have a flexural strength of no less than 12.9mpa. The Flexural Strength of a stone gives an indication of how strong the stone is. The higher the number, the less chance it has of failing or delaminating once in-situ.
What are the best slabs for a driveway?
We have found that one of the best paving slabs you can choose for your driveway are the Natural Paving Riven Sandstone Driveway 50 Heather Modak Driveway Slabs. With a 50mm thickness on this Indian sandstone, it is perfect for a domestic driveway and will be able to withstand a lot of weight.
How long will Indian sandstone last?
Indian sandstone paving can have a very long lifespan if installed and maintained properly. With a cheap installer and poor care you can expect 2 – 10 years from your paving. With a solid base and repointing every few years you can in theory get 30 – 50 years from your paving or perhaps more.
Does Indian sandstone break easily?
The slabs could almost be broken by hand in some instances. Generally speaking, silicon is a tough material. This is the reason that sandstone can be a very hard stone. … The softness of the rainbow Indian sandstone often means that this paving can be damaged in transit, but also in installation.
Is Indian stone good?
Indian sandstone works both as contemporary or traditional sandstone paving slab. As a natural product, it guarantees good performance for water absorption and frost resistance. This means that your sandstone paving slabs will look great for a long time.
How thick should driveway slabs be?
As a rule of thumb, concrete slabs supporting lighter weights such as paths, patios and shed bases will need to be 75-100mm thick, while driveways and garages need to be at least 100mm thick. Slabs intended for commercial use should be at least 175mm thick and reinforced.
What is the best way to clean Indian stone?
Cleaning Indian sandstone is simple. Use soapy water, or, for tougher stains as well as moss and algae, a bleach mixture. Combine equal parts of bleach and water and pour onto the slabs. Leave for around 30 minutes and wash off with a stiff brush, power washer or a hose to ensure you’ve got rid of all the bleach.